Using Reports - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Using Reports

Console Procedures
PC Procedures
Using Reports
The system generates a variety of reports that can help you with your system
management tasks:
The Station Message Detail Recording (SMDR) feature provides
information about incoming and outgoing calls. The content of the report
depends on which of two formats (Basic or ISDN) you select and can
include the type of call (voice or data), the date, the time of the call, the
called number, the duration of the call, the number of the trunk used to
make or receive the call, and an account code, if applicable. This report
prints on the SMDR printer.
The system programming reports include reports that describe how various
aspects of the system are programmed (for example, trunk information,
label information, Allowed and Disallowed Lists, and Pickup Groups), and
an Error Log that describes any system errors that may occur. You reach
these reports from the system programming menu.
The available system programming reports are listed below. With the exception of
Trunk Information, the dash lists under the bullets show the sections of each
report that automatically print when the report option is selected.
All
— Each report
— All report options
System Set Up (System Information Report)
To copy to a single extension:
no. Dial copy to ext. no.
To copy to a block of extensions:
no. Dial ext. no. of first telephone in block
Dial ext. no. of last telephone in block
To copy to a single extension:
Type copy from ext. no.
copy to ext. no.
To copy to a block of extensions:
Type copy from ext. no.
Type ext. no. of first telephone in block
Type ext. no. of last telephone in block
Dial copy from ext.
Dial copy from ext.
6
Issue 1
August 1998
Page 6-33
Type