Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual page 163

Table 4–7. Continued
System Manager's Functions and Features
Lines, line buttons, fixed-feature buttons (continued)
Specify the line selected when a user lifts the
handset or presses the Speaker button.
Take an outside line out of service.
Copy line assignments, buttons, and features
from one extension to another.
Assign lines that can be answered without
operator involvement.
Adjust the ringing at an extension, including
one with a single-line phone or MFM.
Allow Drop, Transfer, and Conference
buttons to access either host or system
features.
Assign a feature button to be a Service
Observing button.
Type PROG Considerations
User SYS
Sys Mgr SYS
User CNT See System
Programming.
User SYS Hybrid/PBX mode only
User EXT System manager only
SYS
for single-line, MFM
General SYS Behind Switch mode
only
User CNT Release 6.1 or later.
MLX telephones only;
not on a QCC.
Extension must be
programmed as a
Service Observer.
Feature Name
Automatic Line Selection and
Ringing/Idle Line Preference
Automatic Maintenance Busy
Personal Lines
Ringing Options
Coverage
Recall/Timed Flash
Service Observing
Continued on next page