Revising Disallowed Lists - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Revising Disallowed Lists

Task List: Assigning Allowed Lists to Telephones
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Assign Allowed Lists
to Extensions" in the "System Features" section of System Programming ,
Chapter 3, or the summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Revising Disallowed Lists
Use this procedure to establish Disallowed Lists that contain telephone numbers
than cannot be dialed from specified telephones (including unrestricted
telephones). A Disallowed List takes precedence over an Allowed List.
Planning Guidelines
Changing Disallowed Lists may affect other features, including Auto Dial,
Automatic Route Selection (ARS), Conference, Forward and Follow Me, personal
lines, Remote Access, and Toll Type. For more information, see the Feature
Reference .
When Disallowed Lists are used in conjunction with Remote Access to restrict
calls made through the system from remote locations, the Disallowed Lists can be
assigned to either a specific barrier code (password) or to specific types of remote
access trunks (for example, all tie/DID trunks).
In Release 3.1 and later systems, star codes may be included in Allowed and
Disallowed Lists. In these systems, dialed star codes are ignored by ARS for
routing calls. Star codes are provided by the central office (CO) to allow the use of
special features (for example, in many areas
provided by the central office). In Release 3.0 and earlier systems, the star code
digits were processed as dialed digits by ARS, Allowed Lists, Disallowed Lists,
Dial list no.
no.
Type list no.
6
6
Dial ext.
Type ext. no.
6
6
turns off a call-waiting feature
Issue 1
August 1998
Page 6-71