MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6
Managing the System
Centralized Telephone Programming
NOTE:
Some programming can be performed only when the entire system or
some part of it (such as a trunk or an extension) is idle. See the section
"Idle States" on page
Starting Centralized Telephone Programming
Reach the Centralized Programming menu from the System Programming menu.
You can then perform centralized telephone programming by selecting features
from the display or by using programming codes.
Follow the procedure below to get to the Centralized Programming menu. For
information about the procedure format, see
Procedures" on page
Console/Display Instructions
Go to the second screen of the System Programming menu.
Select Centralized Programming.
B
Select a programming option.
6–11.
6–3.
Additional Information
Press More.
Select
6
"Using the Programming
or
.
Issue 1
August 1998
Page 6-24
PC