Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual page 413

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
C System Capacities
Similarly, although the 100D module has only one jack, it can serve up to 24
endpoints (emulated, T1 digital, or PRI facilities). Thus, you can configure the
system to connect up to 80 lines/trunks and 255 extension endpoints, a total of
335 endpoints.
NOTE:
The system has a time-slot capacity of 216. If more than 216 endpoints are
in use at the same time, blocking can occur.
Table C–1
constraining factors appear with a checkmark (
the table.
If you are planning to expand your system, contact your Lucent Technologies
representative for additional considerations.
Table C–1.
Allowed/Disallowed Lists
Number of lists
Entries per list
Digits per entry
Automatic Route Selection
Number of ARS tables
Subpatterns per table
Routes per subpattern
Entries per table
Entries across all tables
Default tables
Callback
Number of calls in queue
lists the hardware and software capacities of the system. Some
Hardware and Software Capacities

) and are explained at the end of
Limit Constraining Factor
8
10
7
16
2
6
100
1,600
4
64
Continued on next page
Issue 1
August 1998
Page C-2