Line Or Trunk Feature Status For Mlx-20L Console - Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
C LED Displays
Table C–1. Line or Trunk Feature Status for MLX-20L Console
System
Programming
Menu Option Option
Lines Trunks Tie Lines
Inmode
Outmode Outgoing tie
Dialtone Remote dial
Lines Trunks TT/LS
Disc
Outmode Line/Trunk is
Lines Trunks Pools
Lines Trunks Toll Type Must dial 1 +
Lines Trunks Hold
Disconct
Lines Trunks LS-ID
Delay
Extensions Lines
Trunks
*
LED Status is indicated on LEDs next to the 20 buttons below the display area of the system programming console,
or simulated on the computer screen when using SPM.
†
This is the factory setting.
Green LED
ON OFF
Incoming tie Incoming
line is tie line is
touch-tone rotary dial†
Outgoing
line is tie line is
touch-tone rotary dial†
Local dial
tone† tone
Line/trunk
touch-tone† is rotary dial
1 + dialing is
area code† not needed
Long-450 ms† Short-50 ms
LS-ID Delay LS-ID
is on Delay is off†
Line/trunk or Line/trunk or
pool is pool is not
assigned to assigned to
button button
LED Status*
FLASHING ON
Trunk is
in pool
Trunk is
assigned
to a pool
Issue 1
August 1998
Page C-2
Red LED
OFF FLASHING
Trunk is not
in pool