Assigning Disallowed Lists To Extensions - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Assigning Disallowed Lists to Extensions

10 numbers for each list (numbered 0 through 9)
8 lists for each system (numbered 0 through 7)
8 lists for each telephone
Task List: Changing Disallowed Lists
Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Disallowed Lists" in
the "System Features" section of System Programming , Chapter 3, or the
summary programming instructions below.
When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Assigning Disallowed
Lists to Extensions
Use this procedure to assign established Disallowed Lists to individual
extensions.
Planning Guidelines
Each restricted extension can be assigned to more than one list.
Valid Entries
0 to 7
You can copy restrictions. See "Copy Call Restrictions" in the "Optional Extension
Features" section of Chapter 3, System Programming .
no. Drop
Type list no. and entry no.
+ Type no.
6
6
Dial list no. and entry
Dial no.
6
6
Issue 1
August 1998
Page 6-73