Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual page 257

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System
Programming from a PC with SPM
If the PC is in a remote location and your system has not activated the
Remote Access feature, do the following:
1.
2.
3.
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see
Programming Procedures" on page
Console/Display Instructions
Set up the appropriate physical connections between the PC and the control
unit as described in Chapter 2 of System Programming.
Type and press
Press any key to display a blank screen on which you can enter modem
commands. (You may have to press the key several times.)
Make a data connection to the modem of the control unit.
See Chapter 2, "Programming with SPM," in System Programming . When the
connection is made, the password prompt appears, as shown in Step 5.
Type the remote access password to display the SPM Main Menu shown in
Step 6.
The password does not display when you type it.
Use the main telephone number to place a voice call to the system.
Instruct the operator to transfer the call to the modem by transferring
the call to .
Put the modem online by switching it to data mode.
Additional Information
to display the SPM Welcome screen shown below.
;;;
6–3.
= current version of SPM
Issue 1
August 1998
Page 6-22
"Using the