Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual page 319

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System
Changing Posted Message Labels
Planning Guidelines
Messages 2 through 20 can be changed through programming. Message 1, DO
NOT DISTURB, cannot be changed.
Valid Entries
1 to 20
Each posted message can have a maximum of 16 characters.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes ('),
stars (*), and pound signs (#).
Task List: Changing Posted Message Labels
Obtain Form 10a, Label Form: Posted Messages.
If necessary, read "Labeling" in the Feature Reference for detailed
information about this feature.
Plan changes using the planning guidelines above; record the new values
on Form 10a.
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Posted Message" in
the "Labeling" section of System Programming , Chapter 3, or the summary
programming instructions below.
When you have finished, file Form 10a with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
More
Drop Enter message
Type message no.
Type message
6
6
6
Dial message no.
Issue 1
August 1998
Page 6-84
+