Programming From A Pc With Spm; Exiting System Programming - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Programming from a PC with SPM

Make a selection.

Exiting System Programming

Use the information in
main menu (Menu Mode screen), or the Home screen.
Table 6–5.
To return to:
Previous menu
(or, in some
cases go to the
next item to
program)
Main menu
Normal call
handling
Programming from a PC with SPM
The System Programming and Maintenance (SPM) software package offers an
alternative method of programming using a PC. This method frees the system
programming console for other uses and also provides additional functions. Using
a PC with SPM enables you and qualified service personnel to program the
system from offsite locations.
SPM runs on a DOS-based PC as a standalone package, or on a UNIX System
platform with Integrated Solution II or Integrated Solution III (IS II/III, no longer
available).
NOTE:
Beginning with version 4.25, required for Release 4.1 of the system, SPM
runs under Windows 95 as a DOS application. Beginning with version 6.25,
required for Release 6.1 of the system, SPM is available in a Windows
version called Win SPM . It runs in Windows 95 and Windows NT.
Press the button or function key next to
your selection.
Table 6–5 to return to the System Programming menu, the
Exiting System Programming
On the console press:
Menu
Home
6
On the PC press:
6
Issue 1
August 1998
Page 6-18