Assigning Allowed Lists To Extensions - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Assigning Allowed Lists to Extensions

NOTE:
If you program
to the extension is removed for calls that can be placed by a toll operator.
Also, special characters (such as Pause) are not permitted in Allowed List
entries.
Task List: Revising Allowed Lists
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Allowed Lists" in the
"System Features" section of System Programming , Chapter 3, or the
summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Assigning Allowed Lists to Extensions
Use this procedure to assign individual extensions to established Allowed Lists.
Planning Guidelines
More than one Allowed List can be assigned to an extension.
NOTE:
You can copy calling restrictions. See "Copy Call Restrictions" in Chapter 3
of System Programming .
Valid Entries
0 to 7
as the first digit of a list entry, any toll restriction assigned
Drop Dial no.
Type list no. and entry no.
+ Type no.
6
6
Dial list no. and entry no.
6
6
Issue 1
August 1998
Page 6-70