Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual page 252

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System
Programming from the Console
Access to System Programming
Follow the steps below to begin system programming from the system
programming console. To use this procedure, note the following:
The summary instructions are numbered.
The first column, "Console/Display Instructions," illustrates the display
screens and indicates the console buttons to press.
The middle column, "Additional Information," contains explanatory
information if necessary.
The System Programming menu in Step
Menu" on page
Programming Procedures" on page
Console/Display Instructions
Display the Menu Mode (main menu) screen.
Select System Programming.
Display the System Programming menu.
YYYY
YYYY YYYY
6–8. For information about the procedure format, see
Additional Information
YYYY YYYY
YYYY YYYY
6
4 is described in
6–3.
Press the Menu button.
If the programming console is a QCC,
does not appear on this screen.
On the System Set-up screen, system
information appears in place of
the s.
= Large
= Key, Hybrid/PBX, or Behind Switch
= Position extension numbers
Select
Issue 1
August 1998
Page 6-17
"System Programming
"Using the