Summary Programming Instructions Below; Changing Trunk Labels - Lucent Technologies MERLIN LEGEND System Manager's Manual

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System

Changing Trunk Labels

Task List: Changing Extension Directory Labels
o
Obtain Form 2a, System Numbering: Extension Jacks.
o
If necessary, read "Labeling" in the Feature Reference for detailed
information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on Form 2a.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for "Extension Directory"
in the "Labeling" section of System Programming , Chapter 3, or the

summary programming instructions below.

o
When you have finished, file Form 2a with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Changing Trunk Labels
Use this procedure to establish alphanumeric system labels that help display
telephone users identify the line or trunk being used.
To program on the system programming console:
Use the buttons next to the display and line/feature buttons to specify
alphanumeric characters and punctuation for labels. Use the template provided
with the MLX-20L telephone to see which line buttons correspond to which
alphanumeric characters.
To program with SPM:
Use the PC keyboard for labels. All letters appear on the screen in uppercase.
Planning Guidelines
The availability of the caller identification information may be limited by
local-serving (caller's) jurisdiction, availability, or central office (CO) equipment.
Valid Entries
Each label can have a maximum of seven characters.
More
Labeling Directory
no. Drop Enter label
Enter
Exit Exit
…   
+ Type label
3
6
6
Extension
Enter Exit
Type ext. no.

" ! ! !
6
6
Issue 1
June 1997
Page 6-83
Dial ext.