HP 7102dl - ProCurve Secure Router Configuration Manual page 84

Increasing Bandwidth
Troubleshooting Multilinks
Routers exchange
requests to add a carrier
line to the bundle
2-18
ProCurve# debug frame-relay multilink
2005.07.12 12:11:54 FRAME_RELAY.MULTILINK (O): msg=ADD_LINK, Link=t1
1/2 1, Bundle=MFR1, BL state=ADD_SENT
2005.07.12 12:11:54 FRAME_RELAY.MULTILINK (I): msg=ADD_LINK, Link=t1
1/2 1, Bundle=MFR1, BL state=ADD_SENT
2005.07.12 12:11:54 FRAME_RELAY.MULTILINK (I): msg=ADD_LINK_ACK,
Link=t1 1/2 1, Bundle=MFR1, BL state=ADD_SENT
2005.07.12 12:11:56 FRAME_RELAY.MULTILINK (I): msg=ADD_LINK, Link=t1
1/2 1, Bundle=MFR1, BL state=ADD_RX
2005.07.12 12:11:56 FRAME_RELAY.MULTILINK (O): msg=ADD_LINK_ACK,
Link=t1 1/2 1, Bundle=MFR1, BL state=ADD_RX
Bundle ID
Link ID
Figure 2-8. Successfully Adding a MLFR Link
Message from local router
Message from service provider router
at least one peer has
confirmed the carrier line