Quick Start
This section provides the commands you must enter to quickly configure:
Multilink PPP (MLPPP)
Multilink Frame Relay (MLFR)
Only a minimal explanation is provided. If you need additional information
about any of these options, check "Contents" on page 2-1 to locate the section
that contains the explanation you need.
You may want to print out and complete Table 2-3 to use while you configure
your router.
Table 2-3.
Quick Start Configuration Worksheet
Line
Parameter
new physical line 1
slot
port
new physical line 2
slot
port
new physical line 3
slot
port
existing line
TDM group number
channels
logical interface type
logical interface number
IP address (logical interface)
Increasing Bandwidth
Quick Start
Your Setting
2-19