Accessing The Web Browser Interface - HP 7102dl - ProCurve Secure Router Configuration Manual

Overview
Interface Management Options
1-10
Figure 1-3. Configuring ACPs Using the Web Browser Interface

Accessing the Web Browser Interface

To access the Web browser interface, you must first establish a CLI session
and configure at least one interface through which you can establish an HTTP
session with the router. You must also enable the HTTP server or the HTTP
over Secure Socket Layer (HTTPS) server and configure a password for HTTP
access.
From the global configuration mode context, enter:
ProCurve(config)# ip http server
or
ProCurve(config)# ip https server