Table of Contents
Advertisement
Configuration Using the Web Interface
Backup and Restore
You can use the Backup option to save the current configuration saved in
the ES7506 flash to a PC/laptop or a TFTP server.
This allows you to use the Restore option to restore a configuration file
back to the ES7506 or load the same settings to another ES7506. Before
you can restore a configuration file, you must save the backup
configuration file in the PC or TFTP server. The ES7506 then downloads
this file back into the flash.
The ES7506 configuration file is a standard text file. You can open the file
with WordPad or Notepad. You can also modify the file, add/remove the
configuration settings, and then restore the file back to the ES7506.
There are two modes to backup and restore the configuration file on the
web page:
•
Local File (Windows XP, only).
•
TFTP Server
Note: If you have Windows Server 2003 through Windows 8, you must use the TFTP Server method, the CLI,
or PortVision DX to backup or restore configuration files.
PortVision DX supports saving and loading configuration files, without any Windows operating system
restrictions.
Backup & Restore Page
•
Local File: The ES7506 acts as the file server in Windows XP. Other Windows
operating systems must use the TFTP method or PortVision DX. For procedures, see
Backup the Configuration - Local File Method
Backup
•
TFTP Server: The ES7506 acts as a TFTP client. This mode can be used in both the
Configuration
CLI and web user interface. For procedures, see
Server Method
Note: Pointing to the wrong file causes the entire configuration to be skipped.
Backup
Backup can only backup the configuration file to your PC or a TFTP server.
You can select local file in Windows XP or TFTP server for all Windows operating
Restore
systems to restore the startup configuration. For procedures, see
Configuration
Configuration - Local Method
Method
Restore
Click to restore ES7506 startup configurations to the ES7506.
•
Local File: The ES9528 acts as the file server in Windows XP. Other Windows
operating systems must use the TFTP method or PortVision DX. For procedures, see
Backup the Configuration - Local File
Backup
Configuration
•
TFTP Server: The ES9528 acts as a TFTP client. For procedures, see
Configuration - TFTP Server
Note: Pointing to the wrong file causes the entire configuration to be skipped.
•
The ES7506 provides a default configuration file in the ES7506. To load the default configuration file,
you can use the Reset on the
(Page
112).
•
You can use the CLI to view the latest settings running in the ES7506. The information are the
settings you have configured but have not yet saved to the flash. The settings must be saved to the
flash in order to work after a power recycle. Use the running-config command to view the configuration
file, see
Show Running Configuration
•
After you save the running-config to flash, the new settings are kept and work after the power is
cycled. Use the show startup-config to view it in the CLI. The Backup command can only backup the
configuration file to your PC or TFTP server.
52 - Backup and Restore
on Page 54.
on Page 53 or
on Page 55.
Load Default
page on
on Page 112.
on Page 53.
Backup the Configuration - TFTP
Restore the Configuration - TFTP Server
Method.
Method.
Page 57
or the Reload command in the CLI
RocketLinx ES7506 User Guide: 2000529 Rev. F
Restore the
Backup the
Advertisement
Table of Contents
