Configuring The System Parameters (Ld 17) - Nortel CallPilot Supplementary Manual

Prompt Response
- VSID xx
- ELAN xx
- SECU YES
Configuring the System Parameters (LD 17)
Perform the following procedure to configure the System Parameters.
Configuring the System Parameters (LD 17)
Step
1
2
3
4
Table 11
LD 17 - System Parameters
Prompt Response
REQ CHG
TYPE PARM
Solution Integration Guide for Communication Server 1000/CallPilot/Contact Center/Telephony Manager
Copyright © 2006, Nortel Networks
.
Action
Connect to the Call Server.
Enter LD 17.
Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
To exit the overlay, enter **** and press Return.
Enterprise: Common
NN49000-300 01.01 Standard
CS 1000 Release 4.5 20 December 2006
Configuring CallPilot resources on the CS 1000 27
Descriptions
The VAS identifier can be in the range
of 16–31. For convenience, this can be
the same number you assigned to the
new ELAN subnet link (in response to
the ADAN prompt).
Use the same number as defined in the
ADAN prompt.
Security.
If you have a Contact Center server
connected to your switch, enter YES
(even if you are not using Contact
Center's Voice Services Support).
—End—
Descriptions
Change existing data block
System Parameters
Nortel Networks Confidential