Table of Contents
Advertisement
able to communicate with the system through its IP address. The SFVRA-CFG application would
not be able to download new configuration files; it would not know where to download the files to.
To solve this problem, you can use the SFVRA-CFG application to generate and copy updated
configuration files from the SFVRA-CFG to a specified folder. (The folder can be designated to be
on a diskette, or perhaps a server.) You can then copy the configuration files from the diskette (or
the server) to the system. Instructions for generating and copying configuration files are located in
Exporting Configuration
S
SFVRA-CFG A
TARTING THE
To start the SFVRA-CFG:
1.
Open the SFVRA-CFG application.
2.
From the menu bar, click on File then click on Connect, or click
3.
A dialog box similar to the following will be displayed:
Note that the first time you use the SFVRA-CFG application, the login ID is set to SFVRACFG.
If desired, you may edit this field to change the login ID.
4.
If required, enter your password.
5.
Click OK.
C
B
ONFIGURATION
Using the SFVRA-CFG to enter configuration information is based on a building block concept. You
start with basic information, then you build more information using that basic information.
You begin by building a product code table. A product code is a user-defined code that is associated
with a particular product. For example, you could enter CSX1201 as a product code, and select
CyberSWITCH 1201 as its associated product. Later, as you configure sites, you will use the
product codes when adding systems to the sites.
Next, if your network uses any SFVRA Connection Managers, you will specify information about
any SFVRA Connection Manager databases required. For each SFVRA database, you enter an
SFVRA database location and the SFVRA database version that is running. Later, as you configure
sites, you will select either Local User Table or SFVRA for the User Database. If you select SFVRA,
you will also need to select the SFVRA database site. You will select this from the displayed list of
previously configured SFVRA database locations.
Files.
PPLICATION
B
UILDING
LOCKS
U
SFVRA-CFG A
SING THE
Starting the SFVRA-CFG Application
on the toolbar.
SFVRA Configuration Manager
PPLICATION
31
Advertisement
Table of Contents
