Configuring Security - Cabletron Systems CSMIM-T1 Quick Start Manual

Dataproducts Interface
Set the printer type using na and send data to the printer using aprint:
% na
command: annex 192.9.200.62
command: printer 2
command: set printer type dataproducts
command: reset printer
command: quit
% aprint -A 192.9.200.62 -p2 [filename]
Configuring Security
By default, the Annex allows unrestricted access. If you want to configure
Annex security, refer to the Remote Annex Server Tools for Windows NT®
User Guide.
If you have requested dial-up addresses from the acp_dialup file, refer to
the CSMIM/MicroCS Administrator's Guide for UNIX for information on
adding users to that file.
Check the Security tab and other Quick2Config tab windows to make sure
the selections are appropriate to the configured security regime.
8 Remote Annex Quick Start for Windows