Zonedelete - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

zoneDelete

Deletes a zone.
Synopsis zonedelete "zonename"
Description Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory using the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands The following operands are required:
"zonename"
Examples To delete the zone "Blue_zone":
See Also zoneAdd, zoneCreate, zoneRemove, zoneShow
Fabric OS Command Reference
53-1001186-01
Specify the name of the zone to be deleted. Quotation marks are optional.
switch:admin> zonedelete "Blue_zone"
2
zoneDelete
839