Dlsreset - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

dlsReset

Disables the dynamic load sharing (DLS) option.
Synopsis dlsreset
Description Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full
description of load sharing.
This command should be used only if devices connected to the fabric cannot handle occasional
routing changes correctly.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing
policies.
Operands none
Examples To disable the dynamic load sharing option:
See Also aptPolicy, dlsSet, dlsShow
Fabric OS Command Reference
53-1001186-01
switch:admin> dlsreset
Committing configuration...done.
switch:admin> dlsshow
DLS is not set
2
dlsReset
179