Enclosureshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

enclosureShow

Displays attributes of the switch enclosure.
Synopsis enclosureshow attribute
Description Use this command to display attributes of the switch enclosure, including the vendor-specific
enclosure identifier and the identifier of the enclosure interface to which the switch is attached.
This command applies to products that are embedded in a blade server or storage chassis. Most
options are platform-specific. Options that do not apply to a platform are identified with a "Not
supported on this platform" message.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
attribute
Examples To display the identifier of the enclosure interface to which the switch is attached:
See Also chassisShow
Fabric OS Command Reference
53-1001186-01
Specifies the enclosure attribute. Valid attributes include the following:
id The vendor-specific enclosure identifier.
modelname The vendor-specific enclosure model name.
slotid The identifier of the enclosure interface to which the switch is attached.
rackname The name assigned by the enclosure manager to this rack.
rackid The serial number assigned by the enclosure manager to this rack.
enclosurename
The name assigned by the enclosure manager to this enclosure.
enclosureid The serial number assigned by the enclosure manager to this enclosure.
connname The product name used by the enclosure manager for this switch model.
connaddr The connector address used by the enclosure manager for this switch
(indicates the physical position of the switch in the enclosure).
connid The serial number of the switch used by the enclosure manager (not to be
confused with the Factory Serial Number).
conntype The connector type used by the enclosure manager for this model of switch.
connloc The switch location within the enclosure.
connpres Information about the switch's presence that is used by the enclosure
manager.
connfuse Information about whether or not the switch has a fuse.
switch:admin> enclosureShow slotid
Bay 4
2
enclosureShow
183