Portlogresize - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portLogResize

Resizes the port log to a specified number of entries.
Synopsis portlogresize num_entries
Description Use this command to resize the port log to a specified number of entries. If the specified number of
entries is less than the already configured port log size, there is no change.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
num_entries
Examples To resize the portlog:
See Also portLogConfigShow
Fabric OS Command Reference
53-1001186-01
Specifies the number of port log entries. The valid range of values is 32,768
to 65,536 for the Brocade 7500, 7600, 48000, DCX, and DCX-4S. For all
other platforms, the range is 8,192 to 16,384.
switch:admin> portlogresize 12288
2
portLogResize
611