Perfdelfiltermonitor - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

perfDelFilterMonitor

perfDelFilterMonitor
Deletes one or all filter-based performance monitors from a port.
Synopsis perfdelfiltermonitor [slotnumber/]portnumber [monitorid]
Description Use this command to delete a filter-based performance monitor from a port, or all such monitors
associated with a port.
Notes This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and
GbE ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slotnumber
portnumber
monitorid
Examples To delete filter monitor 4 from a port, and then all filter monitors from the port:
See Also perfAddUserMonitor, perfMonitorShow
508
For bladed systems only, specifies the slot number of the port on which the
monitor is to be deleted, followed by a slash (/).
Specifies the number of the port on which the monitor is to be deleted,
relative to its slot for bladed systems. Use switchShow for a list of valid ports.
Specifies the numeric key of the monitor to be deleted. The key is defined
when a monitor is created and can be displayed with the perfMonitorShow
command. This operand is optional. If omitted, this command deletes all
filter-based performance monitors associated with the port.
switch:admin> perfdelfiltermonitor 2/3 4
The specified filter-based monitor is deleted.
switch:admin> perfdelfiltermonitor 2/3
This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y
Fabric OS Command Reference
53-1001186-01