Fwconfigreload - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

fwConfigReload

Reloads the Fabric Watch configuration.

fwconfigreload

Use this command to reload the Fabric Watch configuration. This command should only be used

after downloading a new Fabric Watch configuration file from a host.

This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

To reload the saved Fabric Watch configuration:

Table of Contents