Fciphelp - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

fcipHelp

fcipHelp
Displays FCIP command information.
Synopsis fciphelp
Description Use this command to display a short description of Fibre Channel over IP (FCIP) commands. FCIP
commands require an FCIP license.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display FCIP command information:
See Also fastWriteCfg, portCfg, portCmd, portShow
214
switch:admin> fciphelp
fastwritecfg
portcfg
portcmd
portshow
Configure FC fastwrite feature
Create/Delete a new ip interface/route/arp entry or
fcip tunnel on the GigE port
Execute commands (ping etc) on the GigE port
Show configured ip interfaces/routes/arp entries or
fcip tunnels on the GigE Port
Fabric OS Command Reference
53-1001186-01