Zoneremove - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

zoneRemove

zoneRemove
Removes a member from a zone.
Synopsis zoneremove "zonename", "zoneMemberList"
Description Use this command to remove one or more members from an existing zone.
If all members are removed, the zone is deleted.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zonename"
"zoneMemberList"
Examples To remove "array2" from "Blue_zone":
See Also zoneAdd, zoneCreate, zoneDelete, zoneShow
844
Specify the name of the zone from which to remove a member. Double
quotation marks are optional.
Specify a member or a list of members to be removed from the specified
zone. The list must be enclosed in double quotation marks. Members must
be separated by semicolons. A member can be one or more of the following:
•
A switch domain and port area or index pair: for example, "2,20". Use
switchShow for a list of valid port area or index numbers.
•
A World Wide Name
•
A zone alias name
switch:admin> zoneremove "Blue_zone", "array2"
Fabric OS Command Reference
53-1001186-01