Stopporttest - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

stopPortTest

Terminates the running portTest.
Synopsis stopporttest [-ports itemlist]
Description Use this command to stop the currently running portTest. Refer to the portTest command for more
information.
If portTest is running in non-singlemode, use stopPortTest to stop the test.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
-ports itemlist
Examples To stop the portTest command:
See Also portLoopbackTest, portTest, portTestShow, spinFab
Fabric OS Command Reference
53-1001186-01
Specify a list of user ports to test. By default, all the user ports in the switch
are tested. Refer to itemList help pages for further details.
switch:admin> stopporttest
2
stopPortTest
745