Switchstatusshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

switchStatusShow

switchStatusShow
Displays overall switch status.
Synopsis switchstatusshow
Description Use this command to display the overall status for a switch that is configured with IPv4 and IPv6
addresses. In addition, users with a Fabric Watch license are able to view the list of unhealthy
ports.
This command displays the overall switch status, and the status of the following contributors:
•
•
•
•
•
•
•
•
•
•
Status values are HEALTHY, MARGINAL, or DOWN, depending on whether thresholds established by
switchStatusPolicySet have been exceeded. The overall status is based on the most severe status
of all contributors.
Refer to switchStatusPolicyShow for details on the calculation of contributors and overall switch
status.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display a switch health report:
776
Power supplies
Temperatures
Fans
WWN servers (dual-CP systems only)
Standby CP (dual-CP systems only with HA enabled)
Blades (bladed systems only)
Flash
Marginal ports
Faulty ports
Missing SFPs
To retrieve a switch health report for a switch that is configured
with an IPv6 address:
switch:user> switchstatusshow
Switch Health Report
Switch Name: switch
IP address: 1080::8:800:200C:417A
SwitchState: MARGINAL
Duration: 80:12
Power supplies monitor
Temperatures monitor
Fans monitor
Flash monitor
Marginal ports monitor
Faulty ports monitor
Report time: 09/11/2006 05:39:28 PM
HEALTHY
HEALTHY
HEALTHY
MARGINAL
HEALTHY
HEALTHY
Fabric OS Command Reference
53-1001186-01