Switchshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

2

switchShow

switchShow
Displays switch and port status.
Synopsis
switchshow [-portcount] [-iscsi]
Description
Use this command to display switch and port status information. Output may vary depending on the
switch model.
Switch summary information includes the following:
switchName
switchType
switchState
switchMode
switchRole
switchDomain
switchId
switchWwn
switchBeacon
zoning
FC Router
FC Router BB Fabric ID
Allow XISL Use
LS Attributes
The switch summary is followed by one-line description for non-EX_Ports and one or two lines for
EX_Ports:
Area
Index
Slot
Port
Address
Media
766
Switch name.
Switch model and revision numbers.
Switch state: Online, Offline, Testing, or Faulty.
Switch operation mode: Native, Interop, or Access Gateway.
Switch role: Principal, Subordinate, or Disabled.
Switch domain ID: 0-31 or 1-239.
Switch embedded port D_ID.
Switch World Wide Name (WWN).
Switch beaconing state: On or Off.
The name of the active zone is displayed in parentheses. Active only when
Access Gateway mode is disabled.
FC Router state: On or Off.
The backbone fabric ID for FC routing.
Allows the switch to use interswitch links (XILS) in the base fabric to carry
traffic to this logical switch. Values are ON or OFF.
Displays logical switch attributes, including the fabric ID associated with the
logical switch and the switch role (default switch or base switch).
Part of the 24-bit port ID, which consists of domain, port area number, and
optional AL_PA. Area column is only displayed on non-modular platforms.
Index follows Area up to 255. Then it continues to the maximum port of the
platform. Index identifies the port number relative to the switch. Index column
is only displayed on enterprise-class platforms.
Slot number; 1-4 and 7-10.
Port number; 0-15, 0-31 or 0-47.
The 24-bit Address Identifier. Address column is only displayed on
enterprise-class platforms.
Media types include:
No module present
--
Fabric OS Command Reference
53-1001186-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents