Iscsichiptest - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

iscsiChipTest

Performs functional test of components in iSCSI complex.
Synopsis iscsichiptest --slot slotnumber -testtype type -unit gbEports
Description Use this command to verify the memory of the network processor and iFlipper FPGA.
Notes This command is supported only on the Brocade FR4-16IP blade. On all other platforms, this
command displays the message:
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
--slot slotnumber
-testtype type
-unit gbeports
Examples To run iscsichiptest:
See Also iscsiPathTest
Fabric OS Command Reference
53-1001186-01
Specifies the slot number for which to run the diagnostics. The default is set
to 0 and designed to operate on fixed-port-count products.
Selects the test type to run. By default, the command runs all tests. Valid
values are:
0 All of the following tests.
1 BCM 1125H SRAM test.
2 iFlipper internal register test.
Specifies the GbE port to test. By default, all GbE ports in the specified slot
slotnumber are tested. Specify a value in the range of 0 - 7 or specify 8 for all
ports.
switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0
Running iscsichiptest ..............
Test Complete: iscsichiptest Pass 1 of 1
Duration 0 hr, 3 min & 12 sec (0:3:12:511).
passed.
"Command not applicable to this platform. SKIPPED!"
2
iscsiChipTest
401