Fcrpathtest - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

fcrPathTest

Tests the data path connection between the FC Router FPGA and the central ASIC.
Synopsis
fcrpathtest [--slot slotnumber][-unit number][-path mode][-nframes count]
Description
Use this command to verify the data path connecting the FC Router field-programmable gate array
(FPGA) and the central ASIC by sending frames from the FC Router FPGA port N transmitter, and
looping the frames back into the same port's receiver. The loopback is accomplished at the parallel
loopback path. The path exercised in this test does not include the media nor the fiber cable.
Only one frame is transmitted and received at any one time. An external cable is not required to run
this test. The port LEDs flicker green rapidly while the test is running.
The test method is as follows:
1. Set all ports present for parallel loopback.
2. Create a frame F of maximum data size (2,112 bytes).
3. Transmit frame F by way of the FC Router FPGA port N.
4. Pick up the frame from the same port N.
5. Check if any of the eight statistic error counters are nonzero:
6. Check if the transmit, receive, or Class 3 receiver counters are stuck at some value.
7.
8. Repeat steps 2 through 7 for all ports present until one of the following conditions is met:
At each pass, a different data type is used to create the frame from a palette of seven; if a pass of
seven is requested, seven different frames are used in the test. If eight passes, the first seven
frames are unique and the eighth is the same as the first pass.
The data palette of seven includes:
Fabric OS Command Reference
53-1001186-01
-
ENC_in
-
CRC_err
-
TruncFrm
-
FrmTooLong
-
BadEOF
-
Enc_out
-
BadOrdSet
-
DropRxUnavail
Check if the number of frames transmitted is not equal to the number of frames received.
a. The number of frames (or passCount) requested is reached.
b. All ports are marked bad.
CSPAT
0x7e, 0x7e, 0x7e, 0x7e, ...
BYTE_LFSR0x69, 0x01, 0x02, 0x05, ...
CHALF_SQ0x4a, 0x4a, 0x4a, 0x4a, ...
QUAD_NOT0x00, 0xff, 0x00, 0xff, ...
CQTR_SQ0x78, 0x78, 0x78, 0x78, ...
CRPAT
0xbc, 0xbc, 0x23, 0x47, ...
RANDOM0x25, 0x7f, 0x6e, 0x9a, ...
2
fcrPathTest
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents