Seccertutil - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

secCertUtil

secCertUtil
Manages certificates on a switch.
Synopsis seccertutil
seccertutil genkey [-nowarn] [-keysize 1024 | 2048]
seccertutil delkey [-nowarn]
seccertutil gencsr [-country country code] [-state state] [-locality locality] [ -org organization]
[-orgunit organization unit] [-cn common name]
seccertutil delcsr [-nowarn]
seccertutil showcsr
seccertutil delete [-ldapcacert] file name [-nowarn]
seccertutil export [-ldapcacert] [-certname certificate name]] [-protocol ftp | scp] [-ipaddr IP
address] [-remotedir remote directory ] [-login login name] [-password password]
seccertutil import [-ldapcacert] | [-config cacert] | [-config swcert [-enable https]] [-protocol ftp |
scp] [-ipaddr IP address] [-remotedir remote directory ] [-certname certificate name] [-login login
name] [-password password]
seccertutil show [-ldapcacert] | [file name]
Description Use this command to manage third-party certificates on a switch, including Public Key
Infrastructure (PKI) based certificates and Lightweight Directory Access Protocol (LDAP)
certificates. This command also imports or exports Certificate Signing Requests (CSRs) from or to a
remote host. This command supports IPV4 and IPV6 addresses.
Use this command to do the following:
•
•
•
•
•
•
•
•
•
•
This command takes an action and associated arguments. If only an action is specified, this
command prompts interactively for input values of the associated arguments. The command runs
non-interactively when the arguments associated with a given action are specified on the
command line. When invoked without operands, this command displays the usage.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
680
Generate a public/private key pair.
Delete a public/private key pair.
Generate a CSR.
Delete a CSR.
List existing certificates on a switch.
Display the contents of a certificate or CSR.
Delete a specified certificate.
Import or export a certificate.
Configure a SSL certificate file name.
Enable secure protocols.
Fabric OS Command Reference
53-1001186-01