Zonedelete - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

zoneDelete

zoneDelete
Deletes a zone.
Synopsis zonedelete "zonename"
Description Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to non-volatile memory using the cfgSave command. For the
change to become effective, enable the configuration with the cfgEnable command.
Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zonename"
Examples To delete the zone "Blue_zone":
See Also zoneAdd, zoneCreate, zoneRemove, zoneShow
710
Specify the name of the zone to be deleted. Quotation marks are optional.
switch:admin> zonedelete "Blue_zone"
Fabric OS Command Reference
53-1000599-02