Dlsshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

dlsShow

Displays the setting of the dynamic load sharing (DLS) option.
Synopsis dlsshow
Description Use this command to display whether DLS is on or off. One of two messages displays:
DLS is set
DLS is not set
Refer to dlsSet for a description of load sharing.
Notes DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing
policies.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the current DLS option setting:
See Also dlsSet, dlsReset
Fabric OS Command Reference
53-1001186-01
The DLS option is turned on. Load sharing is reconfigured with every change
in the fabric, and existing routes can be moved to maintain optimal balance.
The DLS option is turned off. Once placed, existing routes are never moved to
maintain optimal balance.
switch:admin> dlsshow
DLS is set
2
dlsShow
181