Portzoneshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

portZoneShow

portZoneShow
Displays the enforced zone type of the F_Ports and FL_Ports of a switch.
Synopsis portzoneshow
Description Use this command to display the enforced zone type of the F_ports and FL_Ports of a switch.
Output shows virtual port number (decimal), physical port number (decimal), online status, and if
online, port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in
non-zoning mode, in which all devices see each other. When default zoning is enabled with "No
Access" mode, "No Effective configuration: (No Access)" is displayed.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the zone membership information of ports:
See Also cfgShow, switchShow
670
portzoneshow
switch:user>
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port
0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port
0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
[OUTPUT TRUNCATED]
Enforcement: HARD WWN
Enforcement: HARD WWN
defaultHard: 0 IFID:
defaultHard: 0 IFID:
Fabric OS Command Reference
53-1001186-01