Fcpprobeshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

fcpProbeShow

fcpProbeShow
Displays the Fibre Channel Protocol (FCP) probe information.
Synopsis fcpprobeshow [slotnumber/]portnumber
Description Use this command to display the Fibre Channel Protocol daemon (FCPD) device probing
information for the devices attached to the specified F_Port or FL_Port. This information includes
the number of successful logins and SCSI INQUIRY commands sent over this port and a list of the
attached devices.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display the FCP probe information:
See Also portLoginShow, portLogShow
226
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is required.
switch:admin> fcpprobeshow 4/4
port 52 is L-Port and it is online.
nodes probed:
successful PLOGIs:
successful PRLIs:
successful INQUIRies:
successful LOGOs:
outstanding IUs:
probing state:
probing TOV:
probing count:
probing next:
pmap:
update map:
list of devices(may include old devices on the loop):
0x2b4e2: IBM DDYF-T09170R
0x2b4e4: IBM DDYF-T09170R
2
2
2
2
2
0
3
0
0
0
0x00000000, 0x00000000, 0x00000000, 0x00000010
0x00000000, 0x00000000, 0x00000000, 0x00000010
F60N
F60N
Fabric OS Command Reference
53-1001186-01