Fabricshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

fabricShow

Displays fabric membership information.
Synopsis
fabricshow
Description
Use this command to display information about switches in the fabric.
If the switch is initializing or is disabled, the message "no fabric" is displayed. In a mixed fabric,
fabricshow must be executed on a switch that runs Fabric OS v5.3.0 or later; otherwise, IPv6
information is lost, since switches running earlier versions do not recognize an IPv6-configured
switch.
Running this command on an FCR or edge switch does not provide any router information; running
this command on an edge switch with the -m option does provide router information.
If the fabric is reconfiguring, some or all switches may not be displayed; otherwise, the following
fields are displayed:
Switch ID
World Wide Name
Enet IP Addr
FC IP Addr
Name
FC Router IP Addr
FC Router Name
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operands:
-m
Examples
The following example illustrates a fabric of four switches. "sw180" is the Principal switch. Three of
the switches are configured to run IP over Fibre Channel.
To show a mixed fabric with IPv4 and IPv6-configured switches:
Fabric OS Command Reference
53-1001186-01
The switch Domain_ID and embedded port D_ID.
The switch WWN.
The switch Ethernet IP address for IPv4 and IPv6 configured switches. For
IPv6 switches, only the static IP address displays.
The switch FC IP address.
The switch symbolic name. An arrow (>) indicates the principal switch.
The IP address of the FC router. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
The FC Router symbolic name. This field is empty if the switch is not an FC
Router or it the FC Router does not support it.
Displays fabric membership information with additional details of the FC
Router, if present in the fabric.
switch:admin> fabricshow
Switch ID
Worldwide Name
-------------------------------------------------------------------------
64: fffc40 10:00:00:60:69:00:06:56
65: fffc41 10:00:00:60:69:00:02:0b
66: fffc42 10:00:00:60:69:00:05:91
67: fffc43 10:00:00:60:69:10:60:1f
The Fabric has 4 switches
Enet IP Addr
FC IP Addr
192.168.64.59
192.168.65.59
192.168.64.180
192.168.65.180 >"sw180"
192.168.64.60
192.168.65.60
192.168.64.187
0.0.0.0
2
fabricShow
Name
"sw5"
"sw60"
"sw187"
201

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents