portAlpaShow
Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port.
Synopsis
portalpashow [slotnumber/]portnumber
Description
Use this command to display the AL_PAs of devices connected to a port, and whether these devices
are public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this
command prints an error.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operands:
slotnumber
portnumber
Examples
To display the AL_PAs of a port:
See Also
switchShow
Fabric OS Command Reference
53-1001186-01
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
switch:user> portalpashow 4/14
AL_PA
type
0xe2
public
AL_PA
type
0xe4
public
portAlpaShow
AL_PA
type
2
533