Nbrstatsclear - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

nbrStatsClear

nbrStatsClear
Resets FSPF interface counters.
Synopsis nbrstatsclear [slotnumber/][portnumber]
Description Use this command to reset the counters of fabric shortest path first (FSPF) frames transmitted and
received on all interswitch links (ISLs) or on a specified ISL Use this command without operands to
reset counters on all interfaces. Use interfaceShow to view the FSPF counters.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display the counters on a port:
460
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, FSPF
statistics are reset.
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(output truncated)
nCmdAcc = 37
nInvCmd = 0
nHloIn = 10
nInvHlo = 0
nLsuIn = 17
nLsaIn = 10
attHloOut = 11
nHloOut = 11
attLsuOut = 12
nLsuOut = 12
attLsaOut = 17
nLsaOut = 17
Fabric OS Command Reference
53-1001186-01