Statsclear - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

statsClear

statsClear
Clears port and diagnostic statistics.
Synopsis statsclear [--slot slotnumber][-uports itemlist][-bports itemlist][-use_bports value]
Description Use this command to clear the port and diagnostics statistics for the specified list of blade or user
ports.
You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is
not supported by the Brocade platform and does not effect any other feature operations. This
availability is offered to maintain consistency across a mixed-blade environment.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands The following are optional:
--slot slotnumber
-uports itemlist
-bports itemlist
-use_bports value
Examples To clear port and diagnostic statistics:
See Also itemList
744
Specifies the slot on which to operate. If this option is not specified, the
default slot is assumed. The default slot is 0 and designed to operate on
fixed-port-count products, if -use_bports sets with nonzero value.
Specifies the list of user ports for which statistics are to be cleared.
Specifies the list of blade ports for which statistics are to be cleared.
Specify a nonzero value to clear the diagnostics statistics for the blade ports
specified in -bports clears. A value of zero (0) clears the user ports specified
in -uports. The default value is 0.
switch:admin> statsclear -bports 1/10-1/62 -use_bports 1
Fabric OS Command Reference
53-1001186-01