Ficonclear - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

ficonClear

ficonClear
Clears the records from the specified FICON database.
Synopsis ficonclear database
Description Use this command to remove records from the local FICON database. The command effect
depends on the specified database.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
database
Examples To clear the RLIR database:
To clear the RNID database:
See Also ficonHelp, ficonShow
264
Specifies the name of the FICON database. The databases are:
RLIR Remove all entries from the link incidents database including implicit link
incidents (ILIR).
RNID Remove all the "not current" entries from the device node identification
database. The entries are for devices that were previously connected but are
no longer online. Note that "current" entries are not removed from the RNID
database.
switch:user> ficonclear RLIR
successfully clear local RLIR Database.
switch:user> ficonclear RNID
successfully clear not current
entries from local RNID Database.
Fabric OS Command Reference
53-1001186-01