Trunkshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

trunkShow

Displays trunking information.
Synopsis
trunkshow
Description
Use this command to display trunking information of both E_Ports and EX_Ports. The following
fields display:
Trunking Group Number
Port to port connections
WWN
Domain
deskew
Master
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display trunking information for a switch:
Fabric OS Command Reference
53-1001186-01
Displays each trunking group on a switch. All the ports that are part of this
trunking group are displayed.
Displays the port-to-port trunking connections.
Displays the WWN of the connected port.
Displays the domain IDs of the switches directly connected to the physical
ports. In case of a FC Router backbone fabric interlinking several edge
fabrics, the domain ID displayed for an E_Port trunk refers to a domain of a
switch within the backbone fabric, whereas the domain ID displayed for an
EX_Port trunk refers to the domain ID of a switch in the edge fabric. It may so
happen that both the backbone and the edge fabric may have same domain
ID values assigned to switches, as they are independent fabrics. In such a
situation, you may get a clear picture by referring to switchShow output for
additional information on the port types of the local switch and WWNs of the
remote switches. See EXAMPLES, below.
The time difference for traffic to travel over each ISL compared to the time to
the shortest ISL in the group. The number corresponds to nanoseconds
divided by 10. The firmware automatically sets the minimum deskew value of
the shortest ISL to 15.
Displays whether this trunking port connection is the master port connection
for the trunking group.
switch:admin> trunkshow
1: 6 ->
4
10:00:00:60:69:51:43:04
2:15 -> 13
10:00:00:60:69:51:43:04
12 -> 12
10:00:00:60:69:51:43:04
14 -> 14
10:00:00:60:69:51:43:04
13 -> 15
10:00:00:60:69:51:43:04
3:24 -> 14
10:00:00:60:69:51:42:dd
trunkShow
deskew 15
MASTER
deskew 16
MASTER
deskew 15
deskew 17
deskew 16
deskew 15
MASTER
2
801

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents