Portlogpdisc - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portLogPdisc

Sets or clears the debug_pdisc_flag.
Synopsis portlogpdisc 0 | 1
Description Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental
monitor. A setting of 1 will enable logging of Port Discovery parameters. The PDISC log is disabled
by default.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
0|1
Examples To set the debug_pdisc_flag:
See Also none
Fabric OS Command Reference
53-1001186-01
Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.
switch:admin> portlogpdisc 1
PDISC log setting = 1
2
portLogPdisc
609