Perfhelp - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

perfHelp

Displays performance monitoring help information.
Synopsis perfhelp
Description Use this command to display the help commands available for performance monitoring.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display commands related to performance monitoring:
See Also none
Fabric OS Command Reference
53-1001186-01
switch:admin> perfhelp
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
perfCfgClear
perfCfgRestore
perfCfgSave
perfDelEEMonitor
perfDelFilterMonitor
perfMonitorClear
perfMonitorShow
perfSetPortEEMask
perfShowAlpaCrc
perfShowPortEEMask
PerfTTmon
Add end-to-end monitor
Add monitor for IP traffic frame count
Add filter-based monitor - SCSI Read
Add monitor - SCSI Read and Write
Add monitor for SCSI frame count
Add filter-based monitor
Add filter-based monitor - SCSI Write
Clear Performance settings from FLASH
Restore Performance configuration from
FLASH
Save Performance configuration to FLASH
Delete an end-to-end monitor
Delete filter-based monitor
Clear end-to-end/filter-based/ISL
monitors
Show end-to-end/filter-based/ISL
monitors
Set overall mask for end-to-end monitors
Get ALPA CRC count by port and ALPA
Show the current end-to-end mask
Install Top Talker monitor
2
perfHelp
509