Agshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

agshow

Displays the Access Gateway information registered with the fabric.
Synopsis agshow --name [ag_name] | [--local]
Description This command displays the details of the F_Ports and the configured N_Ports in the Access
Gateway attached to the fabric shows the following information.
Name
Ports
Enet IP Addr
Firmware
Local/Remote
World Wide Name
N-Port ID(s)
N-Ports
F-Ports
Attached F-Port information
Note NPIV capability should be enabled on the ports connected to the Access Gateway. Use
portCfgNPIVPort to enable NPIV capability on the specific port.
Operands This command has the following optional operands:
ag_name
--local
Examples To display the Access Gateway information registered with the fabric:
Fabric OS Command Reference
53-1001186-01
The name of the Access Gateway.
The number of ports in the Access Gateway.
The IP address of the Access Gateway.
Current firmware running on the Access Gateway.
Indicates whether the Access Gateway is locally or remotely registered to this
switch.
The World Wide Name (WWN) of the given Access Gateway.
The port ids of the N_Ports configured in the given Access Gateway.
The number of configured N_Ports that are online.
The number of F_Ports that are online.
Displays the PortID and the Port WWN of each F_Port that is online on the
Access Gateway.
Use this option to display the information regarding a specific Access Gateway
that is registered with this fabric.
Use this option to display the information of all Access Gateways that are
locally registered to this switch
switch:admin> agshow --name WT_Stealth
Name : WT_Stealth
World Wide Name : 10:00:00:05:1e:34:e4:bd
N-Port ID(s) : 0x010200
Number of Ports : 16
IP Address(es) : 10.202.90.231
Firmware Version : v1.0.0
N-Ports : 1
F-Ports : 2
Attached F-Port information:
PortID Port WWN
----------------------------------
0x010208 10:00:00:00:c9:3f:7c:86
0x01020a 10:00:00:00:c9:3f:7c:b9
2
agshow
33