Ioddelayreset - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

iodDelayReset

iodDelayReset
Resets the user-defined IOD delay settings to default values.
Synopsis ioddelayreset domain_id
Description Use this command to reset the user-defined IOD delay settings to default values (-1). This
command resets IOD delay values for a specified domain ID that was previously configured with the
iodDelaySet command.
The switch must be disabled before IOD delay can be reset.
Notes The iodDelaySet command is deprecated in Fabric OS v6.2.0. The iodDelayReset command is
retained for legacy reasons only. If you have configured IOD delay settings previously, you must
reset the IOD settings to defaults before upgrading to v6.2.0. Use iodDelayShow to determine
current settings.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A,
"Command Availability" for details.
Operands none
Examples To reset IOD delay to default values for domain 10:
See Also iodDelayShow
358
switch:admin> ioddelayreset 10
Fabric OS Command Reference
53-1001186-01