Configurechassis - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

configureChassis

Changes chassis-level system configuration settings.
Synopsis configurechassis
Description Use this command to modify chassis-level system configuration settings.
Beginning with Fabric OS v6.2.0, configuration data is grouped into chassis information and switch
information. Each configuration type is managed separately.
Use the configure command to modify switch configuration parameters.
Use the configureChassis command to modify the following chassis configuration parameters:
•
•
When executed in a Virtual Fabric environment, this command requires chassis permissions. It is
necessary to disable the chassis before configuring the chassis system parameters. In a
non-Virtual Fabric environment, disable the switch before configuring chassis parameters.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
The configureChassis command interactively presents a hierarchical menu. Each top-level heading
and its associated subheadings consist of a text prompt, a selection of valid values, and a default
value (in brackets).
The following keys control the execution of the command:
Return
Interrupt (Ctrl-C)
End-of-file (Ctrl-D)
The following parameters can be modified with the configureChassis command:
cfgload Attributes
Table 9
TABLE 10
Application
cfgload
Fabric OS Command Reference
53-1001186-01
cfgload attributes
System settings
When entered at a prompt with no preceding input, the command accepts the
default value (if applicable) and moves to the next prompt.
Aborts the command immediately and ignores all changes made.
When entered at a prompt with no preceding input, terminates the command
and saves changes made.
lists the configuration upload and download attributes that may be modified.
Configurable application attributes
File
Enforce secure Config Upload/Download
Enforce signature validation for firmware
configureChassis
Type Default
boolean no
boolean no
2
Range
no/yes
no/yes
113