Haenable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference manual v6.2.0 (53-1001186-01, april 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

haEnable

Enables the High Availability feature.

Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is

already enabled, this command does nothing.

The execution of this command is subject to Virtual Fabric or Admin Domain Restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

To enable the High Availability feature:

Table of Contents